# Baseball stats glossary: what every abbreviation means

Source: https://blackforgesports.com/guides/baseball-stats-glossary/ (BlackForge Sports). By Aryan Jain, reviewed by Michael Krueger. Updated October 1, 2026.

> Baseball is full of abbreviations. This glossary gives each stat a one-line definition and, where there is one, the formula. Stats are grouped by batting, pitching, fielding and baserunning, plus the "measurables" that show up in youth and showcase baseball.

**Short answer:** Baseball stats are abbreviations with one-line definitions and, where there is one, a formula: AVG is batting average (divide hits by at-bats), OBP shows how often a batter reaches base and WHIP is walks plus hits per inning pitched.

## Key facts

- In MLB, a .300 batting average is a long-standing mark of a very good hitter, and youth averages vary widely by age and level.
- OPS is on-base percentage plus slugging percentage, a quick one-number view of a hitter's overall production.
- To find ERA, multiply earned runs by the innings in a regulation game, then divide by innings pitched.
- Use 9 for nine-inning games and 6 or 7 for many youth games, and compare ERAs only between games of the same length.
- Innings pitched are written in thirds, so 5.1 is five and one-third innings and 5.2 is five and two-thirds.
- Small samples bounce around, so look at the trend over a full season, and use stats to celebrate progress, not to rank children.

## Batting stats

- **PA: plate appearances**: Every completed trip to the plate: at-bats plus walks, hit-by-pitches, sacrifices and catcher's interference.
- **AB: at-bats**: Plate appearances that are not a walk, hit-by-pitch, sacrifice bunt or sacrifice fly.
- **AVG: batting average**: `Hits ÷ At-bats`. In MLB, .300 is a long-standing mark of a very good hitter. Youth averages vary widely by age and level, so compare within the same league.
- **OBP: on-base percentage**: `(Hits + Walks + Hit-by-pitch) ÷ (At-bats + Walks + Hit-by-pitch + Sacrifice flies)`. How often a batter reaches base.
- **TB: total bases**: `Singles + 2×Doubles + 3×Triples + 4×Home runs`.
- **SLG: slugging percentage**: `Total bases ÷ At-bats`. Measures power: how many bases a batter gets per at-bat.
- **OPS: on-base plus slugging**: `OBP + SLG`. A quick one-number view of a hitter's overall production.
- **ISO: isolated power**: `SLG − AVG`. Extra-base power, ignoring singles.
- **BABIP: batting average on balls in play**: `(Hits − Home runs) ÷ (At-bats − Strikeouts − Home runs + Sacrifice flies)`.
- **RBI: runs batted in**: Runs that score as a result of the batter's plate appearance.
- **R: runs scored**: Times a player crosses home plate.
- **BB: walks (bases on balls)**: Four balls. Also written BB%, the share of plate appearances that end in a walk.
- **SO or K: strikeouts**: Three strikes. K% is strikeouts ÷ plate appearances.
- **HBP: hit by pitch**: The batter is hit by a pitch and awarded first base.
- **SH / SF: sacrifice bunt / sacrifice fly**: An out that advances or scores a runner. Neither counts as an at-bat.

## Pitching stats

- **IP: innings pitched**: Written in thirds: 5.1 is five and one-third innings, 5.2 is five and two-thirds.
- **ER: earned runs**: Runs that scored without the help of an error or passed ball.
- **ERA: earned run average**: `(Earned runs × innings in a regulation game) ÷ Innings pitched`. Use 9 for nine-inning games; many youth games are six or seven innings, so the multiplier is 6 or 7. Compare ERAs only between games of the same length.
- **WHIP: walks plus hits per inning pitched**: `(Walks + Hits) ÷ Innings pitched`. How many baserunners a pitcher allows per inning.
- **K/9: strikeouts per nine innings**: `Strikeouts × 9 ÷ Innings pitched`. BB/9 works the same way for walks.
- **K/BB: strikeout-to-walk ratio**: `Strikeouts ÷ Walks`. A quick read on control.
- **Pitch count**: Total pitches thrown. Many youth leagues set daily limits and required rest by pitch count. See our [arm care guide](https://blackforgesports.com/guides/arm-care-for-young-pitchers/).
- **W, L, SV, HLD: decisions**: Win, loss, save and hold. The rules differ in youth leagues.

## Fielding stats

- **PO: putouts**: Outs a fielder records directly, such as catching a fly ball or taking a throw at first.
- **A: assists**: Throws or deflections that help produce an out.
- **E: errors**: A misplay that allows a batter or runner to reach or advance when an ordinary effort would have recorded an out.
- **FPCT: fielding percentage**: `(Putouts + Assists) ÷ (Putouts + Assists + Errors)`.
- **DP: double plays**: Two outs recorded on one play.
- **PB: passed ball**: A catcher's failure to handle a pitch that he should have, allowing runners to advance.

## Baserunning stats

- **SB / CS: stolen bases / caught stealing**: Successful and unsuccessful steal attempts. SB% is `SB ÷ (SB + CS)`.
- **LOB: left on base**: Runners still on base when the inning ends.
- **WP / BK: wild pitch / balk**: Pitching events that let runners advance.

_Illustration: Four tiles group baseball stat abbreviations: batting (AVG, OBP, OPS), pitching (ERA, WHIP, IP), fielding (PO, A, E) and baserunning (SB, CS)._

## Measurables

Showcase and youth baseball also track physical measurements. Treat them as snapshots, and note who recorded them and how.

- **Exit velocity**: How fast the ball leaves the bat, in miles per hour, usually read by radar or a sensor.
- **Fastball velocity**: Pitch speed in mph, measured by radar.
- **60-yard dash**: A standard speed test, timed in seconds.
- **Pop time**: For catchers: the time from the pitch reaching the catcher's mitt to the throw reaching the infielder's glove at second base.

Not sure where these appear in a game? See [how to read a baseball box score](https://blackforgesports.com/guides/how-to-read-a-baseball-box-score/).

## Worked examples

Seeing the formulas with real numbers makes them stick. These figures are made up for illustration.

### A batter's season line

Suppose a player has 40 at-bats, 5 walks, 1 hit-by-pitch and 2 sacrifice flies. His 14 hits are 9 singles, 3 doubles, 1 triple and 1 home run.

- **AVG:** 14 ÷ 40 = .350.
- **OBP:** (14 + 5 + 1) ÷ (40 + 5 + 1 + 2) = 20 ÷ 48 = .417.
- **Total bases:** 9 + (2×3) + (3×1) + (4×1) = 22.
- **SLG:** 22 ÷ 40 = .550.
- **OPS:** .417 + .550 = .967.
- **ISO:** .550 − .350 = .200.

### A pitcher's season line

Suppose a pitcher in a league with six-inning games has thrown 14 innings, allowed 4 earned runs, 12 hits and 5 walks, and struck out 22.

- **[ERA](https://blackforgesports.com/guides/glossary/baseball/era/):** (4 × 6) ÷ 14 = 1.71.
- **WHIP:** (5 + 12) ÷ 14 = 1.21.
- **K/9:** (22 × 9) ÷ 14 = 14.1.
- **K/BB:** 22 ÷ 5 = 4.4.

Remember that innings are written in thirds, so 14.2 innings is really 14 and two-thirds (14.667) when you do the math.

## Reading stats fairly

- **Small samples bounce around.** A few games of data can swing an average a lot. Look at the trend over a full season before drawing conclusions.
- **Compare like with like.** Averages and ERAs are not comparable across different ages, leagues, field sizes or game lengths.
- **Scorers differ.** Hit-versus-error and earned-run calls are judgment calls, and the quality of scorekeeping varies in youth ball. Our [scorekeeping guide](https://blackforgesports.com/guides/how-to-keep-score-baseball/) explains how those calls are made.
- **Stats are a conversation starter.** For young players, effort, learning and having fun matter far more than any number. Use stats to celebrate progress, such as a personal best, not to rank children.
- **Know the position.** Fielding numbers mean different things at different spots. See [baseball positions explained](https://blackforgesports.com/guides/baseball-positions-explained/).

## Sources and further reading

1. [Baseball - Rules, Strategy, Stats](https://www.britannica.com/sports/baseball/Analyzing-baseball) Encyclopaedia Britannica
2. [Basics: How to Score a Game](https://www.mlb.com/official-information/basics/score) MLB

Links open in a new tab. Quotations are short excerpts, included with attribution for commentary. BlackForge Sports is not affiliated with or endorsed by the people or organizations named.

## Frequently asked questions

### How do you calculate batting average?

Divide hits by at-bats. A player with 14 hits in 31 at-bats has a .452 average.

### What is the difference between OBP and batting average?

Batting average counts only hits per at-bat. On-base percentage also counts walks and hit-by-pitches, so it shows how often a player reaches base.

### How is ERA calculated in youth baseball?

Multiply earned runs by the number of innings in a regulation game (often six or seven in youth ball, nine in MLB) and divide by innings pitched.

### What is OPS in baseball?

OPS is on-base percentage plus slugging percentage. It combines how often a batter reaches base with how much power he shows, giving a quick one-number view of production.

### What does WHIP stand for?

Walks plus hits per inning pitched: add walks and hits, then divide by innings pitched.

---
Canonical page: https://blackforgesports.com/guides/baseball-stats-glossary/
General information, not medical, legal or league-rules advice.
